RYL Bakin Karfe Babban Gudun Man Fetur

a.Kayayyakin Tacewa da Daidaitawa: A cikin wannan jerin samfuran, zaku sami zaɓin kayan tacewa daban-daban.Nau'in I yana ɗaukar ragar bakin karfe na musamman tare da daidaiton tacewa daga 5 zuwa 100 microns, gami da tazara kamar 8, 16, 20, 25, 30, 40, 50, 80, da 100 microns.Nau'in II yana amfani da bakin ƙarfe fiber sintered ji, yana samar da daidaiton tacewa a 5, 10, 20, 25, 40, da 60 microns, da sauransu.A ƙarshe, Nau'in III yana fasalta kayan tacewa mai haɗaka da aka yi da fiber gilashi, yana ba da daidaiton tacewa a 1, 3, 5, da 10 microns, da sauransu.

b.A cikin yanayin yanayi inda zafin matsakaicin aiki da zafin zafin mai tace kayan ya wuce ko daidai 60 ℃, yana da kyau a yi amfani da ko dai bakin karfe na musamman raga ko bakin karfe fiber sintered ji don kayan tacewa.Bugu da ƙari, abin tacewa yakamata a haɗa shi gaba ɗaya ta amfani da bakin karfe.Lokacin da yawan zafin jiki na man fetur ya wuce 100 ℃, yana da mahimmanci don samar da takamaiman umarni yayin tsarin zaɓin.

c.Lokacin zabar ƙararrawar bambancin matsa lamba da masu tace bawul, ana ba da shawarar zaɓin ƙararrawar bambancin matsa lamba.Yana da kyau a yi amfani da ƙararrawar bambancin matsa lamba na gani tare da saita matsi na 0.1MPa, 0.2MPa, da 0.35MPa.Ya kamata a yi amfani da duka ƙararrawar gani na kan-site da ƙararrawar sadarwa ta nesa.A cikin lokuta inda akwai babban buƙatar adadin kwarara, la'akari da shigar da bawul ɗin wucewa.Wannan yana tabbatar da samar da mai ba tare da katsewa ba a cikin tsarin mai, koda lokacin da tacewa ya toshe kuma ya kunna ƙararrawa.

d.Lokacin zabar bawul ɗin magudanar mai don samfuran sama da RYL-50, yana da kyau a yi la'akari da haɗa da bawul ɗin magudanar mai.Daidaitaccen bawul ɗin magudanar mai shine canjin hannu wanda aka sani da RSF-2.Don samfuran da ke ƙasa da RYL-50, ba a haɗa bawul ɗin magudanar mai gabaɗaya.Koyaya, a cikin yanayi na musamman, ana iya yin la'akari da haɗa su bisa takamaiman buƙatu, waɗanda ƙila sun haɗa da matosai ko maɓallan hannu.